The scissor platform is made from an aluminum frame with a flush-fitting, firmly screwed cover plate or an adapted carrier plate to accommodate parquet surfaces etc. (adapted to the hall / existing floor). The scissor construction is made of rectangular steel tubing, powder-coated against impact and scratches. The platform is firmly screwed to the floor in a pit provided by the customer, so that the height can be adjusted from above with little pulling force with an adjustment tool.
Scissors type platform Alu-Top / hall floor adjustment
For stationary installation.
Scissors made of rectangular steel tubing, powder-coated in accordance with DIN 4112 and DIN 1055. The Alu-Top platforms are installed flush with the floor of the hall. This means that the platform is always ready to hand and does not require any storage space.
With four special gas springs and plug-in operating levers, the height of the Alu-Top platform can be adjusted with little pulling force.
Areas of application: schools, municipality, city, multi-purpose halls
Studios, theater, choir, orchestra
Organizers: industry, broadcasters, sports and music industries
| Technical Details: | Alu-Top |
| Standard Size: | 2 x 1 m (special sizes possible) |
| Height adjustment: | 16 2/3 or 20 cm rise (max. height depending on platform size and pit depth) |
| Structural Requirements: | minimum 20 cm pit depth |
| Pay Load: | 750 kg/m² |
| Carrier Plate: | 25 mm, optionally covered with the upper floor of the hall (parquet for example) |
TUEV-tested after DIN 15921 with GS mark
Numerous accessories like stage handrails, facings, stairs etc. are available on request.
Scissors type platform Alu-Top
Accessories
Umfangreiches Zubehör wie Treppen, Schutzgeländer, Podestverblendungen erhalten Sie auf Anfrage.
Fixation for stage handrail
Stage handrails suitable for your use
Textile facing
Wooden facing for hanging in the assembly channel
Wooden facing screwed into the assembly channel